713626920 Wheel Hub Bearing For KIA
The DUHUI 713626920 wheel hub bearing is a direct-fit rear axle replacement designed for Kia Soul II (PS) models. This rear wheel hub bearing is directly interchangeable with OE numbers 713626920, 201857, 44-25059, and KAWH-B2R, and also crosses with SKF VKBA 7628 and FAG 713 6269 20. It features a 5-bolt flange design and is equipped with an integrated magnetic sensor ring for seamless compatibility with vehicle ABS systems .
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01512 |
| Part Number | 713626920 |
| Position | Rear Axle |
| Outer Diameter 1 | 139.00 mm (5.472 inch) |
| Bolt Holes | 5 |
| Weight | 3.10 kg (6.83 lbs) |
| ABS Sensor | Equipped (with integrated magnetic sensor ring) |
Note: This rear wheel hub bearing features a 5-bolt flange design and is equipped with an integrated magnetic sensor ring. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01512
OE Numbers: 713626920, 201857, 44-25059, KAWH-B2R
Reference Numbers (Interchange):
KIA: 201857, 44-25059, KAWH-B2R
SKF: VKBA7628
FAG: 713626920
803697, 01.98313, ABK2133, RA2692, 052439B, BWK1520
Vehicle Fitment
KIA: Soul II (PS) 1.6 CRDi (2014-2018), Soul II 1.6 CVVT/GDI/LPG/TGDI (2014-2018), Soul II 2.0 CVVT (2014-2018), Soul II EV Electric (2014-2018)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered specifically for Kia Soul II (PS) applications
- Integrated magnetic sensor ring for seamless compatibility with vehicle ABS systems
- 5-bolt flange design provides enhanced load distribution and stability
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 713626920, 201857, 44-25059, and KAWH-B2R for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 713626920, 201857, 44-25059, or KAWH-B2R before installation
- Confirm the 5-bolt flange matches your Kia Soul II rear hub
- This is an ABS-equipped hub assembly – confirm your vehicle has ABS before ordering
- Ensure the magnetic sensor ring is properly aligned with the vehicle’s ABS sensor during installation
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Kia service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
