3520007CAD0000 Wheel Hub Bearing For GAC-Trumpchi
The DUHUI 3520007CAD0000 wheel hub bearing is a direct-fit rear axle replacement designed for GAC Trumpchi GA8 and GS8 2WD models. This rear wheel hub bearing meets OE specification 3520007CAD0000 and includes an integrated ABS sensor, delivering reliable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01325 |
| Part Number | 3520007CAD0000 |
| Position | Rear Axle (Axle Beam) |
| ABS Sensor | Included |
| Bearing Material | GCr15 (SAE52100) |
| Flange Material | 55# steel |
| Bolt Thread Size | M12 x 1.5 |
| Weight | 1.12 kg (2.47 lbs) |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01325
OE Numbers: 3520007CAD0000
Reference Numbers (Interchange):
TRULY0764: 3520007CAD0000
Vehicle Fitment
GAC TRUMPCHI: GA8 (2016-2023), GS8 (2016-2023) – 2WD only
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered specifically for GAC Trumpchi GA8 and GS8 2WD models
- Double-row ball bearing design provides stable load distribution for SUV and sedan applications
- Integrated ABS magnetic sensor ring for precise wheel speed signaling
- Manufactured from GCr15 bearing steel with 60-65HRC hardness control for wear resistance
- Sealed construction with stainless steel and NBR rubber seals blocks mud, water, and dust
- 100% product inspection ensures consistent quality
- Factory-sealed and pre-lubricated – no routine maintenance required
Installation Notes
- Verify the OE number on your original bearing matches 3520007CAD0000 before installation
- Confirm rear axle fitment for your specific GAC Trumpchi GA8 or GS8 2WD model
- This bearing is designed for 2WD configurations – verify your vehicle’s drive type
- Clean the axle beam mounting surface thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to GAC service manual specifications; over-torquing can shorten bearing life
- After installation, check ABS sensor clearance and rotate the hub to ensure smooth operation
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
