5QD407621B Wheel Hub Bearing For VW
The DUHUI 5QD407621B wheel hub bearing is a direct-fit front axle replacement designed for Volkswagen MQB platform vehicles. This front wheel hub bearing meets OE specification 5QD407621B and features a 5-bolt flange with integrated magnetic ABS sensor ring, delivering reliable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | 5QD407621B |
| Position | Front Axle |
| Outer Diameter | 136.40 mm (5.370 inch) |
| Hub Length | 84.00 mm (3.307 inch) |
| Inner Diameter | 29.00 mm (1.142 inch) |
| Bolt Holes | 5 |
| Mounting Type | 3-point fixing (small three-hole) |
| ABS Sensor | Integrated magnetic sensor ring |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 5QD407621B, 5QD 407 621 B, 5Q0407621B
Reference Numbers (Interchange):
5QD498625: 5QD407621B
5Q0 407 621 B: 5QD407621B
SKF: VKBA6556
Timken: HA590198
BCA: 513262
BR930823: 5QD407621B
Vehicle Fitment
VOLKSWAGEN: Golf VII (2013-2020), Golf Sportsvan, Jetta, Passat B8, Tiguan, Touran
AUDI: A3 (8V, 2013-2020), Q2, Q3 (F3, 2019+)
SKODA: Octavia III (2013-2020), Superb III, Karoq
SEAT: Leon (2013-2020), Ateca
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered for VW MQB platform vehicles with 3-point mounting
- 5-bolt flange design with integrated magnetic sensor ring for precise ABS/ESP signal generation
- Hub flange and bearing factory-preassembled with controlled clamping force via orbital forming
- Maintenance-free design with premium bearing steel and optimized sealing systems
- Precision-machined raceways with specific roller and raceway profiles for reduced friction
- Direct OE replacement with matching 5QD407621B specification
Installation Notes
- Verify the OE number on your original bearing matches 5QD407621B before installation
- Confirm 3-point fixing (small three-hole) mounting configuration
- Check hub pilot diameter before installation
- Clean the hub mounting surface thoroughly before fitting the new assembly
- Replace axle bolt and mounting bolts – do not reuse old hardware
- Torque the axle nut to VW service manual specifications
- After installation, check ABS sensor clearance and rotate the hub to ensure smooth operation
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
