HAEV3103100 Wheel Hub Bearing For BYD
The DUHUI HAEV3103100 wheel hub bearing is a direct-fit front axle replacement designed for BYD Qin, Qin EV, and E5 models from 2015 to 2019. This front wheel hub bearing meets OE specification HAEV3103100 and includes an integrated ABS sensor, delivering reliable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01538 |
| Part Number | HAEV3103100 |
| Position | Front Axle |
| ABS Sensor | Integrated |
| Material | GCr15 Chrome Steel |
| Precision Rating | ABEC-3 / ABEC-5 |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01538
OE Numbers: HAEV3103100, HAEV-3103100
Reference Numbers (Interchange):
QW31389: HAEV3103100
Z89097R: HAEV3103100
Vehicle Fitment
BYD: Qin (2015-2019), Qin EV (2015-2019), Qin Pro, E5 (2015-2019), Surui (front)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered for BYD Qin, Qin EV, and E5 models
- Precision roll-formed design ensures consistent and optimized factory-installed preload, minimizing excessive noise and wear
- Application-specific advanced raceway designs reduce stress, rotation and heat on components, extending service life
- Coated wheel bolts effectively prevent rust, ensuring smooth disassembly and accurate torque
- Manufactured in ISO/TS 16949 certified facilities to OE specifications
- Factory-sealed and pre-lubricated – no routine maintenance required
Installation Notes
- Verify the OE number on your original bearing matches HAEV3103100 before installation
- Confirm front axle fitment for your specific BYD Qin or E5 model
- Check the condition of the steering knuckle and ABS sensor during replacement
- Clean the hub mounting surface thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to BYD service manual specifications; over-torquing can shorten bearing life
- After installation, check ABS sensor clearance and rotate the hub to ensure smooth operation
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
