350282 Wheel Hub Bearing For Changan
The DUHUI 350282 wheel hub bearing is a direct-fit rear axle replacement designed for Changan Benni MINI, Alto, and CX20 models. This rear wheel hub bearing meets OE specifications 350282 and 1202011, and is configured without ABS, delivering reliable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01245 |
| Part Number | 350282 |
| Position | Rear Axle |
| ABS Sensor | Not Included |
| Bearing Material | GCr15 (SAE52100) |
| Flange Material | 55# Steel |
| Cage Material | PA66+GF25 |
| Seal Material | Stainless Steel + NBR |
| Wheel Stud Grade | 10.9 |
| Bearing Rings Hardness | 60-65 HRC |
| Ball/Roller Hardness | 61-66 HRC |
| Precision Rating | ABEC-3 / ABEC-5 |
| Quality Guarantee | 2 Years / 60,000 km |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01245
OE Numbers: 350282, 1202011
Reference Numbers (Interchange):
WH210188: 350282, 1202011
Vehicle Fitment
CHANGAN: Benni MINI (2009-2016), Alto, CX20 (2010-2016)
Note: This bearing is configured without ABS sensor. Verify your vehicle’s ABS system before ordering.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered specifically for Changan Benni MINI, Alto, and CX20 models
- Second-generation hub bearing design with 4-bolt flange for secure wheel attachment
- Precision roll-formed design ensures consistent and optimized factory-installed preload, minimizing excessive noise and wear
- Application-specific advanced raceway designs reduce stress, rotation and heat on components, extending service life
- Triple rubber seal design with stainless steel and NBR rubber blocks mud, water and dust
- Coated wheel bolts effectively prevent rust, ensuring smooth disassembly and accurate torque
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Factory-sealed and pre-lubricated – no routine maintenance required
Installation Notes
- Verify the OE number on your original bearing matches 350282 or 1202011 before installation
- Confirm rear axle fitment for your specific Changan Benni, Alto, or CX20 model
- This bearing is configured without ABS sensor – verify your vehicle’s ABS system before ordering
- Check the condition of the axle beam and seals during replacement
- Clean the hub mounting surface thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Changan service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
