10094080 Wheel Hub Bearing For Roewe
The DUHUI 10094080 wheel hub bearing is a direct-fit rear axle replacement designed for Roewe RX5 models. This rear wheel hub bearing meets OE specifications 10094080 and 30009115, and features an integrated 48-tooth ABS sensor ring, delivering reliable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01004 |
| Part Number | 10094080 |
| Position | Rear Axle |
| Outer Diameter | 136.00 mm (5.354 inch) |
| Inner Diameter 2 | 30.00 mm (1.181 inch) |
| Bolt Holes | 4 |
| Thread Size | M12 x 1.5 |
| ABS Sensor | Included (48 teeth tone ring) |
| Bearing Material | GCr15 Chrome Steel |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01004
OE Numbers: 10094080, 30009115
Reference Numbers (Interchange):
ROEWE: 10094080, 30009115
Vehicle Fitment
ROEWE: RX5 (rear axle, 4-bolt, with ABS)
MG: GS (rear axle, with ABS)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered specifically for Roewe RX5 and MG GS models
- 4-bolt flange design for secure wheel attachment
- Integrated 48-tooth ABS sensor ring for precise wheel speed signaling – compatible with factory ABS systems
- Precision roll-formed design ensures consistent and optimized factory-installed preload, minimizing excessive noise and wear
- Application-specific advanced raceway designs reduce stress, rotation and heat on components, extending service life
- Coated wheel bolts effectively prevent rust, ensuring smooth disassembly and accurate torque
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Factory-sealed and pre-lubricated – no routine maintenance required
Installation Notes
- Verify the OE number on your original bearing matches 10094080 or 30009115 before installation
- Confirm rear axle fitment for your specific Roewe RX5 model
- This bearing includes ABS sensor – verify your vehicle has ABS configuration
- Check 4-bolt flange pattern matches your vehicle’s hub
- Clean the hub mounting surface thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Roewe service manual specifications; over-torquing can shorten bearing life
- After installation, check ABS sensor clearance and rotate the hub to ensure smooth operation
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
