F582469.01 Wheel Hub Bearing For Geely
The DUHUI F582469.01 wheel hub bearing is a direct-fit rear axle replacement designed for Geely Borui models. This rear wheel hub bearing meets OE specifications F582469.01, 4050001300 and EBH3519, and features a double-row ball bearing design with integrated ABS sensor, delivering reliable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01228 |
| Part Number | F582469.01 |
| Position | Rear Axle |
| Outer Diameter | 152.00 mm (5.984 inch) |
| Bolt Holes | 5 |
| Input Shaft Teeth | 48 |
| ABS Sensor | Integrated |
| Bearing Type | Double Row Ball Bearing |
| Material | GCr15 (SAE52100) Chrome Steel |
| Flange Material | 55# Steel |
| Cage Material | PA66+GF25 |
| Seal Material | Stainless Steel + NBR |
| Wheel Stud Grade | 10.9 |
| Bearing Rings Hardness | 60-65 HRC |
| Ball/Roller Hardness | 61-66 HRC |
| Precision Rating | ABEC-3 / ABEC-5 |
| Quality Guarantee | 2 Years / 60,000 km |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01228
OE Numbers: F582469.01, F58246901, 4050001300, 40500-01300, EBH3519
Reference Numbers (Interchange):
GSPAT: F-582469, 4050001300
Autoround: F58246901
Vehicle Fitment
GEELY: Borui (rear axle, with ABS, 5-bolt)
GEELY: Borui GT (rear axle, with ABS, 5-bolt)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered specifically for Geely Borui models
- Double-row ball bearing design provides stable load distribution
- Integrated 48-tooth ABS sensor ring for precise wheel speed signaling – compatible with factory ABS systems
- 5-bolt flange configuration for secure wheel attachment
- Precision roll-formed design ensures consistent and optimized factory-installed preload, minimizing excessive noise and wear
- Application-specific advanced raceway designs reduce stress, rotation and heat on components, extending service life
- Triple rubber seal design with stainless steel and NBR blocks mud, water and dust
- Coated wheel bolts effectively prevent rust, ensuring smooth disassembly and accurate torque
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Factory-sealed and pre-lubricated – no routine maintenance required
Installation Notes
- Verify the OE number on your original bearing matches F582469.01 or 4050001300 before installation
- Confirm rear axle fitment for your specific Geely Borui model
- This bearing includes ABS sensor – verify your vehicle has ABS configuration
- Check 5-bolt flange pattern matches your vehicle’s hub
- Clean the hub mounting surface thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Geely service manual specifications; over-torquing can shorten bearing life
- After installation, check ABS sensor clearance and rotate the hub to ensure smooth operation
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
