A213001030 Wheel Hub Bearing For CHERY
The DUHUI A213001030 wheel hub bearing is a direct-fit front axle replacement designed for Chery Eastar, A5, and B11 models. This front wheel hub bearing meets OE specifications A213001030 and VKBA3937, and features a 4-bolt flange with integrated magnetic sensor ring for precise ABS signal generation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0213 |
| Part Number | A213001030 |
| Position | Front Axle |
| Inner Diameter | 37.00 mm (1.457 inch) |
| Outer Diameter | 139.00 mm (5.472 inch) |
| Width | 88.40 mm (3.480 inch) |
| Width 2 | 66.40 mm (2.614 inch) |
| Outer Diameter 2 | 91.20 mm (3.591 inch) |
| Bolt Holes | 4 |
| ABS Sensor | Integrated magnetic sensor ring (28 teeth) |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0213
OE Numbers: A213001030, VKBA3937
Reference Numbers (Interchange):
SKF: VKBA3937
CHERY: A213001030
Vehicle Fitment
CHERY: Eastar (2006-2010), A5 (2006-2010), B11 (2006-2010)
Note: This bearing features a 28-tooth ABS sensor ring with 4-bolt flange. Verify your vehicle’s configuration before ordering.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered specifically for Chery Eastar, A5, and B11 models
- Integrated magnetic ABS sensor ring with 28-tooth configuration for precise wheel speed signaling – compatible with factory ABS systems
- 4-bolt flange design for secure wheel attachment
- Double-row ball bearing design provides stable load distribution
- Precision roll-formed design ensures consistent and optimized factory-installed preload, minimizing excessive noise and wear
- Application-specific advanced raceway designs reduce stress, rotation and heat on components, extending service life
- Coated wheel bolts effectively prevent rust, ensuring smooth disassembly and accurate torque
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Factory-sealed and pre-lubricated – no routine maintenance required
Installation Notes
- Verify the OE number on your original bearing matches A213001030 or VKBA3937 before installation
- Confirm front axle fitment for your specific Chery Eastar, A5, or B11 model
- This bearing includes magnetic ABS sensor ring – verify your vehicle has ABS configuration
- Check 4-bolt flange pattern matches your vehicle’s hub
- Clean the hub mounting surface thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Chery service manual specifications; over-torquing can shorten bearing life
- After installation, check ABS sensor clearance and rotate the hub to ensure smooth operation
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
