S113301030BA Wheel Hub Bearing For CHERY
The DUHUI S113301030BA wheel hub bearing is a direct-fit rear axle replacement designed for Chery QQ3 and QQ3EV models without ABS. This rear wheel hub bearing meets OE specification S113301030BA, and features a 4-bolt flange with M12 x 1.25 thread specification for secure wheel attachment.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0598 |
| Part Number | S113301030BA |
| Position | Rear Axle |
| Inner Diameter | 25.00 mm (0.984 inch) |
| Outer Diameter | 139.00 mm (5.472 inch) |
| Bolt Holes | 4 |
| Thread Size | M12 x 1.25 |
| Product Weight | 2.34 kg (5.16 lbs) |
| ABS Sensor | Not Included |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0598
OE Numbers: S113301030BA
Reference Numbers (Interchange):
CHERY: S113301030BA
Vehicle Fitment
CHERY: QQ3 (S11, 2003-2015, without ABS)
CHERY: QQ3EV (S11, 2011-2016, without ABS)
Note: This bearing is configured without ABS sensor. Verify your vehicle’s ABS system before ordering.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered specifically for Chery QQ3 and QQ3EV models without ABS
- 4-bolt flange design with M12 x 1.25 thread specification for secure wheel attachment
- Configured without ABS sensor – suitable for non-ABS vehicle variants
- Precision roll-formed design ensures consistent and optimized factory-installed preload, minimizing excessive noise and wear
- Application-specific advanced raceway designs reduce stress, rotation and heat on components, extending service life
- Coated wheel bolts effectively prevent rust, ensuring smooth disassembly and accurate torque
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Factory-sealed and pre-lubricated – no routine maintenance required
Installation Notes
- Verify the OE number on your original bearing matches S113301030BA before installation
- Confirm rear axle fitment for your specific Chery QQ3 or QQ3EV model
- This bearing is configured without ABS sensor – verify your vehicle’s ABS system before ordering
- Check 4-bolt flange pattern with M12 x 1.25 threads matches your vehicle’s hub
- Clean the hub mounting surface thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Chery service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
