Wheel Bearing Kits VKBA6726 For CITROËN
The DUHUI VKBA6726 wheel bearing kit is a direct-fit rear axle replacement designed for Citroën C3 II models from 2012 to 2016. This rear wheel bearing kit meets OE specifications VKBA6726, R166.33, and 1401761931, and includes bearing, cap, nut, and circlip for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK1132 |
| Part Number | VKBA6726 |
| Position | Rear Axle |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 65.00 mm (2.559 inch) |
| Width | 35.00 mm (1.378 inch) |
| Kit Contents | Bearing x1, Cap x1, Nut x1, Circlip x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK1132
OE Numbers: VKBA6726, R166.33, 1401761931, 761931
Reference Numbers (Interchange):
SKF: VKBA6726
R166.33: R166.33
Vehicle Fitment
CITROËN: C3 II (SC_) 1.2 VTi 82 (2012-2016)
CITROËN: C3 II 1.0, 1.4 (2010-2016)
PEUGEOT: 208 (2012-2018, rear)
PEUGEOT: 2008 (2013-2018, rear)
DS: DS3 (2010-2016, rear)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit for Citroën C3 II – includes bearing, cap, nut, and circlip
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA6726 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA6726 or any listed OE number before installation
- Confirm rear axle fitment for your specific Citroën C3 II model (2012-2016)
- This is a complete kit – replace bearing, cap, nut, and circlip as a set
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
