Wheel Bearing Kits VKBA6740 For CITROËN
The DUHUI VKBA6740 wheel bearing kit is a direct-fit front axle replacement designed for Citroën C-Zero and Peugeot iOn electric vehicles from 2010 to 2019. This front wheel bearing kit meets OE specifications VKBA6740, R173.66, and 72408, and includes bearing, circlip, split pin, and cap for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK1090 |
| Part Number | VKBA6740 |
| Position | Front Axle |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 64.00 mm (2.520 inch) |
| Width | 37.00 mm (1.457 inch) |
| ABS Sensor | Integrated |
| Kit Contents | Bearing x1, Circlip x1, Split Pin x1, Cap x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK1090
OE Numbers: VKBA6740, R173.66, 72408, PWK2039, 1610978380, 335096
Reference Numbers (Interchange):
SKF: VKBA6740
R173.66: R173.66
Vehicle Fitment
CITROËN: C-Zero (2010-2020)
PEUGEOT: iOn (2010-2019)
MITSUBISHI: i-MiEV (2009-2020)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit for Citroën C-Zero, Peugeot iOn, and Mitsubishi i-MiEV – includes bearing, circlip, split pin, and protective cap
- Integrated ABS sensor ring for precise wheel speed signaling – compatible with factory ABS systems
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA6740 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA6740 or any listed OE number before installation
- Confirm front axle fitment for your specific Citroën C-Zero, Peugeot iOn, or Mitsubishi i-MiEV model
- This bearing includes integrated ABS sensor – verify your vehicle has ABS configuration
- This is a complete kit – replace bearing, circlip, split pin, and cap as a set
- Use a Magnetic Encoder Detector to verify ABS side before mounting
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to manufacturer service manual specifications; over-torquing can shorten bearing life
- After installation, check ABS sensor clearance and rotate the hub to ensure smooth operation
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
