Wheel Bearing Kits VKBA1336 For CITROËN
The DUHUI VKBA1336 wheel bearing kit is a direct-fit front axle replacement designed for Citroën BX models from 1983 to 1989. This front wheel bearing kit meets OE specifications VKBA1336, R166.11, and 713640170, and includes bearing, split pin, and circlip for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK026 |
| Part Number | VKBA1336 |
| Position | Front Axle |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 36.00 mm (1.417 inch) |
| Kit Contents | Bearing x1, Split Pin x1, Circlip x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK026
OE Numbers: VKBA1336, R166.11, 713640170, 335020, 95619161, 332630, 6611, 26591, 601336, ABK358
Reference Numbers (Interchange):
SKF: VKBA1336
R166.11: R166.11
Vehicle Fitment
CITROËN: BX (XB-) 14 E (1983-1989)
CITROËN: BX 16 (1983-1989)
CITROËN: BX 19 (1983-1989)
PEUGEOT: 405 (1987-1993, front)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit for Citroën BX – includes bearing, split pin, and circlip
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA1336 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA1336 or any listed OE number before installation
- Confirm front axle fitment for your specific Citroën BX model (1983-1989)
- This is a complete kit – replace bearing, split pin, and circlip as a set
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
