Wheel Bearing Kits VKBA915 For CITROËN
The DUHUI VKBA915 wheel bearing kit is a direct-fit replacement designed for Citroën Berlingo and Berlingo First models from 2002 to 2011. This versatile wheel bearing kit can be used on both front and rear axles, meeting OE specifications VKBA915, 166.13, and 713640180, and includes bearing, circlip, nut, and split pin for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK988 |
| Part Number | VKBA915 |
| Position | Front & Rear |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 36.00 mm (1.417 inch) |
| Kit Contents | Bearing x1, Circlip x1, Nut x1, Split Pin x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK988
OE Numbers: VKBA915, 166.13, 713640180, 330756, 335016, 332635, 95619160, 95496252, 95590022, 96129301
Reference Numbers (Interchange):
SKF: VKBA915
166.13: 166.13
Vehicle Fitment
CITROËN: Berlingo / Berlingo First Box Body/MPV (M_) 1.4 bivalent (2002-2011)
CITROËN: Berlingo 1.6, 1.9D, 2.0HDi (2002-2011)
PEUGEOT: Partner (2002-2011)
PEUGEOT: Partner Box Body (2002-2011)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete wheel bearing kit for Citroën Berlingo – includes bearing, circlip, nut, and split pin
- Versatile design suitable for both front and rear axle applications
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA915 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA915 or any listed OE number before installation
- Confirm front or rear axle fitment for your specific Citroën Berlingo model (2002-2011)
- This is a complete kit – replace bearing, circlip, nut, and split pin as a set
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
