Wheel Bearing Kits VKBA7505 For CITROËN
The DUHUI VKBA7505 wheel bearing kit is a direct-fit rear axle replacement designed for Citroën C-Crosser All-wheel Drive models from 2010 to 2012. This rear wheel bearing kit meets OE specifications VKBA7505, R186.10, and 713619890, and includes hub and split pin for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK924 |
| Part Number | VKBA7505 |
| Position | Rear Axle |
| Kit Contents | Hub x1, Split Pin x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK924
OE Numbers: VKBA7505, R186.10, 713619890, 3785A009, 1606291880
Reference Numbers (Interchange):
SKF: VKBA7505
R186.10: R186.10
Vehicle Fitment
CITROËN: C-Crosser (VU_, VV_) 2.0 All-wheel Drive (2010-2012)
PEUGEOT: 4007 All-wheel Drive (2010-2012)
MITSUBISHI: Outlander II All-wheel Drive (2010-2012)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit for Citroën C-Crosser AWD – includes hub and split pin
- Designed specifically for All-wheel Drive (AWD) models
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA7505 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA7505 or any listed OE number before installation
- Confirm rear axle fitment for your specific Citroën C-Crosser AWD model (2010-2012)
- This is a hub assembly kit – replace hub and split pin as a set
- This kit is designed for All-wheel Drive (AWD) models – verify your vehicle’s drive configuration
- Clean the mounting surface thoroughly before fitting the new hub assembly
- Use a proper hydraulic press or hub installer – do not strike the hub directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
