Wheel Bearing Kits VKBA6575 For CITROËN
The DUHUI VKBA6575 wheel bearing kit is a direct-fit front axle replacement designed for Citroën Jumpy models from 2007 to 2016. This front wheel bearing kit meets OE specifications VKBA6575, R159.55, and 713640540, and includes bearing, nut, and circlip for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK671 |
| Part Number | VKBA6575 |
| Position | Front Axle |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 36.00 mm (1.417 inch) |
| Kit Contents | Bearing x1, Nut x1, Circlip x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK671
OE Numbers: VKBA6575, R159.55, 713640540, 9403350889, 9403350930, 335093, 335088, 71748673, 27717
Reference Numbers (Interchange):
SKF: VKBA6575
R159.55: R159.55
Vehicle Fitment
CITROËN: Jumpy (VF7) 1.6 HDi 90 16V (2007-2016)
CITROËN: Jumpy 2.0 HDi (2007-2016)
PEUGEOT: Expert (2007-2016)
FIAT: Scudo (2007-2016)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit for Citroën Jumpy – includes bearing, nut, and circlip
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA6575 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA6575 or any listed OE number before installation
- Confirm front axle fitment for your specific Citroën Jumpy model (2007-2016)
- This is a complete kit – replace bearing, nut, and circlip as a set
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
