Wheel Bearing Kits VKBA6544 For CITROËN
The DUHUI VKBA6544 wheel bearing kit is a direct-fit rear axle replacement designed for Citroën C-Elysée models from 2012 to 2017. This rear wheel bearing kit meets OE specifications VKBA6544, R159.53, and 713640480, and includes bearing, nut, cap, and circlip for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK650 |
| Part Number | VKBA6544 |
| Position | Rear Axle |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 36.00 mm (1.417 inch) |
| Kit Contents | Bearing x1, Nut x1, Cap x1, Circlip x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK650
OE Numbers: VKBA6544, R159.53, 713640480, 374890, 5950, QWB1330
Reference Numbers (Interchange):
SKF: VKBA6544
R159.53: R159.53
Vehicle Fitment
CITROËN: C-Elysée (DD_) 1.2 VTi 72 (DDHMY0) (2012-2017)
CITROËN: C-Elysée 1.6 VTi (2012-2017)
CITROËN: C-Elysée 1.6 HDi (2012-2017)
PEUGEOT: 301 (2012-2017)
PEUGEOT: 301 1.2 VTi (2012-2017)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit for Citroën C-Elysée – includes bearing, nut, cap, and circlip
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA6544 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA6544 or any listed OE number before installation
- Confirm rear axle fitment for your specific Citroën C-Elysée model (2012-2017)
- This is a complete kit – replace bearing, nut, cap, and circlip as a set
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
