Wheel Bearing Kits VKBA3658 For CITROËN
The DUHUI VKBA3658 wheel bearing kit is a direct-fit rear axle replacement designed for Citroën C2 models from 2003 to 2012. This rear wheel bearing kit meets OE specifications VKBA3658, R166.07, and 713640320, and includes bearing, nut, cap, cover plate, circlip, and oil seal for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK462 |
| Part Number | VKBA3658 |
| Position | Rear Axle |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 36.00 mm (1.417 inch) |
| Kit Contents | Bearing x1, Nut x1, Cap x1, Cover Plate x1, Circlip x1, Oil Seal x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK462
OE Numbers: VKBA3658, R166.07, 713640320, 374877, 334909, 6607, 27551, QWB1227
Reference Numbers (Interchange):
SKF: VKBA3658
R166.07: R166.07
Vehicle Fitment
CITROËN: C2 (JM_) 1.1 (2003-2012)
CITROËN: C2 1.4, 1.6, 1.4 HDi (2003-2012)
CITROËN: C3 I (2002-2009)
PEUGEOT: 207 (2006-2012)
PEUGEOT: 206+ (2006-2012)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit for Citroën C2 – includes bearing, nut, cap, cover plate, circlip, and oil seal
- Comprehensive kit designed for full axle rebuild applications
- Precision-machined to OE specifications for accurate fitment
- Includes oil seal for complete sealing protection
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA3658 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA3658 or any listed OE number before installation
- Confirm rear axle fitment for your specific Citroën C2 model (2003-2012)
- This is a complete kit – includes bearing, nut, cap, cover plate, circlip, and oil seal for full axle service
- Install new oil seal carefully to prevent leaks – apply a thin coat of grease to seal lips
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
