Wheel Bearing Kits VKBA3633 For CITROËN
The DUHUI VKBA3633 wheel bearing kit is a direct-fit front axle replacement designed for Citroën C8, Peugeot 807, Fiat Ulysse, and Lancia Phedra models from 2002 to 2014. This front wheel bearing kit meets OE specifications VKBA3633, R159.45, and 1326188080, and includes bearing, circlip, and nut for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK440 |
| Part Number | VKBA3633 |
| Position | Front Axle |
| Inner Diameter | 44.00 mm (1.732 inch) |
| Outer Diameter | 82.50 mm (3.248 inch) |
| Width | 37.00 mm (1.457 inch) |
| ABS Sensor | Integrated |
| Kit Contents | Bearing x1, Circlip x1, Nut x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK440
OE Numbers: VKBA3633, R159.45, 713640020, 1326188080, 71731547, 335070, 335081, 335087, 71752156, 9403350700
Reference Numbers (Interchange):
SKF: VKBA3633
R159.45: R159.45
Vehicle Fitment
CITROËN: C8 (EA_, EB_) (2002-2014)
PEUGEOT: 807 (2002-2014)
FIAT: Ulysse (2002-2010)
LANCIA: Phedra (2002-2010)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit for Citroën C8 and compatible models – includes bearing, circlip, and nut
- Integrated ABS sensor ring for precise wheel speed signaling – compatible with factory ABS systems
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA3633 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA3633 or any listed OE number before installation
- Confirm front axle fitment for your specific Citroën C8, Peugeot 807, Fiat Ulysse, or Lancia Phedra model
- This bearing includes integrated ABS sensor – verify your vehicle has ABS configuration
- This is a complete kit – replace bearing, circlip, and nut as a set
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, check ABS sensor clearance and rotate the hub to ensure smooth operation
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
