Wheel Bearing Kits VKBA3584 For CITROËN
The DUHUI VKBA3584 wheel bearing kit is a direct-fit front axle replacement designed for Citroën Berlingo Box Body/MPV (B9) models from 2010 to 2017. This front wheel bearing kit meets OE specifications VKBA3584, R159.44, and 713630760, and includes bearing, circlip, and nut for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK398 |
| Part Number | VKBA3584 |
| Position | Front Axle |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 36.00 mm (1.417 inch) |
| Kit Contents | Bearing x1, Circlip x1, Nut x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK398
OE Numbers: VKBA3584, R159.44, 713630760, 1606623580, 335069, 335084, 335097, 5944, 27260, 601953
Reference Numbers (Interchange):
SKF: VKBA3584
R159.44: R159.44
Vehicle Fitment
CITROËN: Berlingo Box Body/MPV (B9) 1.6 HDi 90 (2010-2017)
CITROËN: Berlingo B9 1.6 HDi 75, 2.0 HDi (2010-2017)
PEUGEOT: Partner Box Body/MPV (B9) 1.6 HDi (2010-2017)
OPEL: Combo D (2012-2017)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit for Citroën Berlingo B9 – includes bearing, circlip, and nut
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA3584 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA3584 or any listed OE number before installation
- Confirm front axle fitment for your specific Citroën Berlingo B9 model (2010-2017)
- This is a complete kit – replace bearing, circlip, and nut as a set
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
