Wheel Bearing Kits VKBA3428 For CITROËN
The DUHUI VKBA3428 wheel bearing kit is a direct-fit front axle replacement designed for Citroën Jumper Bus (230P) 1.9 D models from 1999 to 2002. This front wheel bearing kit meets OE specifications VKBA3428, R140.94, and 713650330, and includes two bearings, two oil seals, and nut for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK261 |
| Part Number | VKBA3428 |
| Position | Front Axle |
| Kit Contents | Bearing x2, Oil Seal x2, Nut x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK261
OE Numbers: VKBA3428, 1300535080, 332641, 335024, 335030
Reference Numbers (Interchange):
SKF: VKBA3428
SNR: R140.94
FAG: 713650330
QUINTON HAZELL: QWB1338
DELPHI: BK1288
OPTIMAL: 602369
SPIDAN: 26960
RUVILLE: 4094
NK: 751624
Vehicle Fitment
CITROËN: Jumper Bus (230P) 1.9 D (1999-2002)
CITROËN: Jumper 2.0, 2.5 TD (1999-2002)
PEUGEOT: Boxer Bus (1999-2002)
FIAT: Ducato Bus (1999-2002)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit for Citroën Jumper – includes two bearings, two oil seals, and nut
- Comprehensive kit designed for full axle rebuild applications
- Includes oil seals for complete sealing protection
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA3428 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA3428 or any listed OE number before installation
- Confirm front axle fitment for your specific Citroën Jumper model (1999-2002)
- This is a complete kit – includes two bearings, two oil seals, and nut for full axle service
- Install new oil seals carefully to prevent leaks – apply a thin coat of grease to seal lips
- Clean the spindle and hub thoroughly before fitting the new bearings
- Use proper bearing installation tools – do not strike the bearings directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
