Wheel Bearing Kits VKBA961 For CITROËN
The DUHUI VKBA961 wheel bearing kit is a direct-fit rear axle replacement designed for Citroën Saxo (S0, S1) models from 1996 to 2003. This rear wheel bearing kit meets OE specifications VKBA961 and 159.19, and includes bearing, oil seal, circlip, nut, and cover plate for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK1013 |
| Part Number | VKBA961 |
| Position | Rear Axle |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 36.00 mm (1.417 inch) |
| Kit Contents | Bearing x1, Oil Seal x1, Circlip x1, Nut x1, Cover Plate x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK1013
OE Numbers: VKBA961, 374817, 95654078, 6001539074
Reference Numbers (Interchange):
SKF: VKBA961
SNR: 159.19
FAG: 713650290
RUVILLE: 5919
SPIDAN: 26539
OPTIMAL: 602320
QUINTON HAZELL: QWB1336
DELPHI: BK1298
NK: 751647
FIRST LINE: FBK759
Vehicle Fitment
CITROËN: Saxo (S0, S1) 1.6 VTS (1996-2003)
CITROËN: Saxo 1.0, 1.1, 1.4, 1.5D (1996-2003)
PEUGEOT: 106 (1996-2003)
PEUGEOT: 106 Rallye (1996-2003)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit for Citroën Saxo – includes bearing, oil seal, circlip, nut, and cover plate
- Comprehensive kit designed for full axle rebuild applications
- Includes oil seal and cover plate for complete sealing protection
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA961 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA961 or any listed OE number before installation
- Confirm rear axle fitment for your specific Citroën Saxo model (1996-2003)
- This is a complete kit – includes bearing, oil seal, circlip, nut, and cover plate for full axle service
- Install new oil seal carefully to prevent leaks – apply a thin coat of grease to seal lips
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
