Wheel Bearing Kits VKBA1412 For CITROËN
The DUHUI VKBA1412 wheel bearing kit is a direct-fit front axle replacement designed for Citroën XM (Y4) 2.1 TD 12V models from 1994 to 2000. This front wheel bearing kit meets OE specifications VKBA1412 and R159.24, and includes hub, circlip, and split pin for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK072 |
| Part Number | VKBA1412 |
| Position | Front Axle |
| Kit Contents | Hub x1, Circlip x1, Split Pin x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK072
OE Numbers: VKBA1412, 335015, 95035620, 96095947, 332638
Reference Numbers (Interchange):
SKF: VKBA1412
SNR: R159.24
FAG: 713640080
RUVILLE: 5924
SPIDAN: 26829
OPTIMAL: 601348
QUINTON HAZELL: QWB1337
DELPHI: BK1296
NK: 751886
FIRST LINE: FBK794
Vehicle Fitment
CITROËN: XM (Y4) 2.1 TD 12V (1994-2000)
CITROËN: XM (Y4) 2.0 i 16V, 2.0 Turbo, 3.0 V6, 2.5 TD (1994-2000)
PEUGEOT: 605 (1994-2000)
PEUGEOT: 607 (1994-2000)
Note: This kit is designed for vehicles from June 1997 onwards.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit for Citroën XM – includes hub, circlip, and split pin
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA1412 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA1412 or any listed OE number before installation
- Confirm front axle fitment for your specific Citroën XM model (1994-2000)
- This is a hub assembly kit – replace hub, circlip, and split pin as a set
- Clean the mounting surface thoroughly before fitting the new hub assembly
- Use a proper hydraulic press or hub installer – do not strike the hub directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
