Wheel Bearing Kits VKBA1327 For CITROËN
The DUHUI VKBA1327 wheel bearing kit is a direct-fit replacement designed for Citroën Saxo (S0, S1) models from 1996 to 2003. This versatile wheel bearing kit can be used on both front and rear axles, and includes bearing, circlip, and nut for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK022 |
| Part Number | VKBA1327 |
| Position | Front & Rear |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 36.00 mm (1.417 inch) |
| Kit Contents | Bearing x1, Circlip x1, Nut x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK022
OE Numbers: VKBA1327, 332639, 335018, 95654074, 95603182, 95654075
Reference Numbers (Interchange):
SKF: VKBA1327
SNR: R166.14
FAG: 713640190
RUVILLE: 6614
SPIDAN: 26716
QUINTON HAZELL: QWB1335
DELPHI: BK1295
OPTIMAL: 602321
NK: 751608
FIRST LINE: FBK765
Vehicle Fitment
CITROËN: Saxo (S0, S1) 1.4 VTS (1996-2003)
CITROËN: Saxo 1.0, 1.1, 1.5D, 1.6 (1996-2003)
PEUGEOT: 106 (1996-2003)
Note: This bearing kit is suitable for both front and rear axle applications. Verify your specific fitment requirements before ordering.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete wheel bearing kit for Citroën Saxo – suitable for front and rear axle applications
- Includes bearing, circlip, and nut for a complete installation
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA1327 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA1327 or any listed OE number before installation
- Confirm front or rear axle fitment for your specific Citroën Saxo model (1996-2003)
- This is a complete kit – replace bearing, circlip, and nut as a set
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Citroën service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
