Wheel Bearing Kits VKBA7408 For CHRYSLER
The DUHUI VKBA7408 wheel bearing kit is a direct-fit front axle replacement designed for Chrysler Sebring (JS) 2.0 CRD models from 2007 to 2010. This front wheel bearing kit meets OE specifications VKBA7408, R173.27, and 713619790, and includes bearing, circlip, and split pin for a complete installation.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK893 |
| Part Number | VKBA7408 |
| Position | Front Axle |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 36.00 mm (1.417 inch) |
| Kit Contents | Bearing x1, Circlip x1, Split Pin x1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK893
OE Numbers: VKBA7408, 5105586AA, 5105587AA, MN101347, 3885A017
Reference Numbers (Interchange):
SKF: VKBA7408
SNR: R173.27
FAG: 713619790
RUVILLE: 332674
Vehicle Fitment
CHRYSLER: Sebring (JS) 2.0 CRD (2007-2010)
CHRYSLER: Sebring 2.4, 3.5 (2007-2010)
DODGE: Avenger (2007-2010)
MITSUBISHI: Galant (2007-2010)
Note: This bearing kit is designed for front axle applications. Verify your vehicle’s engine and configuration before ordering.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit for Chrysler Sebring – includes bearing, circlip, and split pin
- Precision-machined to OE specifications for accurate fitment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Cross-referenced with SKF VKBA7408 and multiple OEM numbers for easy identification
Installation Notes
- Verify the OE number on your original bearing matches VKBA7408 or any listed OE number before installation
- Confirm front axle fitment for your specific Chrysler Sebring model (2007-2010)
- This is a complete kit – replace bearing, circlip, and split pin as a set
- Clean the hub mounting surface thoroughly before fitting the new bearing
- Use a proper hydraulic press or bearing installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Chrysler service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
