Ordinary Release Bearing VKC3523
The DUHUI VKC3523 clutch release bearing is a direct-fit replacement engineered for Toyota and Mitsubishi commercial vehicle applications. This clutch release bearing meets multiple OE specifications including 90363-45001-J, 90363-45002, 44002-57100, and ME600198, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3523 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 90363-45001-J, 90363-45002, 44002-57100, ME600198
Reference Numbers (Interchange):
SKF: VKC3523
Timken: RCTS45
NTN: 45TKD07U3
Vehicle Fitment
TOYOTA: Dyna Bus (_U3_, _U2_) 3.4 D (BU82) (1977-1987), Dyna Platform/Chassis (_U_, _Y_) 3.0 D (BU20, BU25, BU30) (1977-1984), Land Cruiser (_J4_, _J5_) 3.4 D (BJ42, BJ45, BJ46) (1980-1984)
MITSUBISHI: Various models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Toyota and Mitsubishi commercial vehicle clutch systems.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple Toyota and Mitsubishi specifications – installs with no modifications.
- Interchangeable with LUK 500070460 and major brand references for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to the vehicle manufacturer’s factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
