Ordinary Release Bearing VKC3511
The DUHUI VKC3511 clutch release bearing is a direct-fit replacement engineered for Isuzu, Toyota, and Mazda applications. This clutch release bearing meets multiple OE specifications including 5-09803-004-0 and 90043-67014, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3511 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 5-09803-004-0, 5-09803-005-0, 90043-67014, 0820-16-510A, 0222-16-222, 0222-16-220
Reference Numbers (Interchange):
SKF: VKC3511
Timken: RCT45-1S
NTN: TK45-4A
Vehicle Fitment
MAZDA: 1000 (FA3) 1.0 (1975-1977), 616 (SNA) 1.6 (1973-1978), 818 Estate 1.6 (SN3AV) (1977-1978)
ISUZU: Various models
TOYOTA: Various models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Isuzu, Toyota, and Mazda clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple manufacturer specifications – installs with no modifications.
- Interchangeable with LUK 500022860, Sachs 1863801001, and major brand references for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to the vehicle manufacturer’s factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
