Ordinary Release Bearing VKC3513
The DUHUI VKC3513 clutch release bearing is a direct-fit replacement engineered for Isuzu, Toyota, Mitsubishi, and Mazda applications. This clutch release bearing meets multiple OE specifications including 9-00095-038-1, 90363-45079, and MD800241, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3513 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 9-00095-038-1, 90363-45079, MD800241, 0603-16-222, 0672-16-220, 0086-16-222/A
Reference Numbers (Interchange):
SKF: VKC3513
Timken: CT45-1S
NTN: TK45-4U3
Vehicle Fitment
TOYOTA: Land Cruiser (_J4_, _J5_) 3.0 D 4WD (BJ42, BJ40RV) (1969-1984)
ISUZU: Various models
MITSUBISHI: Various models
MAZDA: Various models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Isuzu, Toyota, Mitsubishi, and Mazda clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple manufacturer specifications – installs with no modifications.
- Interchangeable with LUK 500070560 and major brand references for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to the vehicle manufacturer’s factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
