Ordinary Release Bearing VKC3548
The DUHUI VKC3548 clutch release bearing is a direct-fit replacement engineered for Toyota Land Cruiser applications. This clutch release bearing meets OE specifications 90363-45009 and 90363-45013, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3548 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 90363-45009, 90363-45013
Reference Numbers (Interchange):
SKF: VKC3548
Timken: RCTS45A
NTN: 45TKD10U3
Vehicle Fitment
TOYOTA: Land Cruiser (_J6_) 4.0 D (HJ60) (1981-1988), Land Cruiser (_J6_) 4.0 Turbo-D (HJ61) (1985-1989), Land Cruiser (_J7_, _JL7_) 3.4 TD (BJ71, BJ74) (1985-1986)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Toyota Land Cruiser clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for 90363-45009 and 90363-45013 – installs with no modifications.
- Interchangeable with LUK 500070360 and major brand references for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to Toyota factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
