Ordinary Release Bearing VKC3606
The DUHUI VKC3606 clutch release bearing is a direct-fit replacement engineered for Opel and Isuzu applications. This clutch release bearing meets OE specifications including 0636659, 94379499, and 8-94453-348-0, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3606 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 0636659, 94379499, 8-94379-499-0, 8-94453-348-0
Reference Numbers (Interchange):
SKF: VKC3606
Timken: RCT422SA1
NTN: 613012
Vehicle Fitment
OPEL: Campo (TF0, TF1) 3.1 TD (TFR69) (1992-2001), Frontera A (U92) 2.8 TD (1995-1998), Monterey A (M92) 3.1 TD (1991-1998)
ISUZU: Elf Platform/Chassis (NHR5) 2.8 D (1985-2003), Trooper I (UBS) 2.8 TD (UBS55) (1988-1991), Trooper II Open Off-Road Vehicle (UB) 3.1 TD (1991-1998)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Opel and Isuzu clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple manufacturer specifications – installs with no modifications.
- Interchangeable with LUK 500064060, Sachs 1863860001, and major brand references for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to the vehicle manufacturer’s factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
