Ordinary Release Bearing VKC3506
The DUHUI VKC3506 clutch release bearing is a direct-fit replacement engineered for Toyota, Nissan, and Mazda applications. This clutch release bearing meets multiple OE specifications including 90363-40003 and 90043-67016, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3506 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 83151-7000, 43151-7000, 90363-40003, 90363-40010, 90043-67016, 90363-40045, 90363-40078
Reference Numbers (Interchange):
SKF: VKC3506
Timken: RCT4064SL1
NTN: TK40-14AU3
Vehicle Fitment
TOYOTA: Celica Coupe (_A2_) 2.0 (RA23, RA28) (1975-1977), Corona (RT1) 2.0 (RT104) (1976-1979), Dyna Bus (_U3_, _U2_) 2.4 D (JU20) (1977-1979)
NISSAN: Various models
MAZDA: Various models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Toyota, Nissan, and Mazda clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple manufacturer specifications – installs with no modifications.
- Interchangeable with LUK 500017760, Sachs 1863807001, and major brand references for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to the vehicle manufacturer’s factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
