Ordinary Release Bearing VKC3505
The DUHUI VKC3505 clutch release bearing is a direct-fit replacement engineered for a wide range of applications including Toyota, Mitsubishi, Isuzu, Nissan, Opel, and Suzuki. This clutch release bearing meets multiple OE specifications including 90363-38056, 33151-7800, and MD701283, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3505 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 4293481, 33151-7800, 9-00095-040-1, 9-00095-040-0, 90363-38056, 90363-38009, MD701283, 09269-38001
Reference Numbers (Interchange):
SKF: VKC3505
Timken: RCT38SL1
NTN: 24TK308B2U3
Vehicle Fitment
MITSUBISHI: Galant III Station Wagon (A12_V) 1.6 GL (A121V) (1979-1980)
TOYOTA: Carina I (TA1) 1.6 (TA12, TA14) (1970-1978)
OPEL, NISSAN, ISUZU, SUZUKI: Various models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches multiple manufacturer clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple manufacturer specifications – installs with no modifications.
- Interchangeable with LUK 500022760, Sachs 1850282709, and major brand references for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to the vehicle manufacturer’s factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
