Ordinary Release Bearing VKC3600
The DUHUI VKC3600 clutch release bearing is a direct-fit replacement engineered for Hyundai and Mazda passenger car applications. This clutch release bearing meets multiple OE specifications including 41421-4Z000 and BP02-16-510, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3600 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 41421-4Z000, BP02-16-510, FE62-16-510/A, K011-16-510, OSR02-16-510, 0K247-16-510
Reference Numbers (Interchange):
SKF: VKC3600
Timken: RCT364SA
NTN: 54TKE3604
Vehicle Fitment
MAZDA: 323 C IV (BG) 1.8 16V 4WD (BG8S) (1991-1993), 323 F VI Hatchback (BJ) 2.0 TD (1998-2001), 6 Saloon (GG) 2.0 (GGEP) (2002-2007)
HYUNDAI: Various models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Hyundai and Mazda clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple manufacturer specifications – installs with no modifications.
- Interchangeable with LUK 500049760 and Sachs 3151600536 for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to the vehicle manufacturer’s factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
