Ordinary Release Bearing VKC2215
The DUHUI VKC2215 clutch release bearing is a direct-fit replacement engineered for Opel and Daewoo passenger car applications. This clutch release bearing meets multiple OE specifications including 90250663 and 90278910, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2215 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 90250663, 90278910, 90250658, 0668650, 0668652, 0668653
Reference Numbers (Interchange):
SKF: VKC2215
Timken: RDC1063
NTN: 614172
Vehicle Fitment
OPEL: Agila (A) (H00) 1.2 16V (F68) (2000-2007), Ascona C (J82) 1.6 (F11, F68, M11, M68) (1986-1988), Astra F Classic Estate (T92) 1.4 i (F35, M35) (1998-2005)
DAEWOO: Various models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Opel and Daewoo clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple manufacturer specifications – installs with no modifications.
- Interchangeable with LUK 500032010 and Sachs 3151175031 for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to the vehicle manufacturer’s factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
