Ordinary Release Bearing 8973334880
The DUHUI 8973334880 clutch release bearing is a direct-fit replacement engineered for Isuzu Trooper and Suzuki applications. This clutch release bearing is interchangeable with SKF VKC3606 and meets OE specifications including 8973334880 and 8980546570, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | 8973334880 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 8973334880, 8980546570
Reference Numbers (Interchange):
SKF: VKC3606
Timken: 54TKZ3501
Vehicle Fitment
ISUZU: Trooper I (UBS) 2.8 TD (UBS55) (1987-1991), Trooper I Open Off-Road Vehicle (UBS) 2.6 i (UBS17) (1987-1991)
SUZUKI: Various models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Isuzu Trooper and Suzuki clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple manufacturer specifications – installs with no modifications.
- Interchangeable with LUK 500064060 and Sachs 1863860001 for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to the vehicle manufacturer’s factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
