Ordinary Release Bearing VKC3678
The DUHUI VKC3678 clutch release bearing is a direct-fit replacement engineered for Suzuki Grand Vitara off-road vehicle applications. This clutch release bearing meets OE specification 23265-65D00, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3678 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 23265-65D00
Reference Numbers (Interchange):
SKF: VKC3678
Timken: FCR60-41-3/2E
Vehicle Fitment
SUZUKI: Grand Vitara I (FT, HT) 1.6 4×4 (SQ416) (1998-2003), Grand Vitara I Open Off-Road Vehicle (GT) 1.6 4×4 (SQ416) (1998-2003), Grand Vitara II (JT, TE, TD) 1.6 All-wheel Drive (JB416) (2005-2015)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Suzuki Grand Vitara clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for 23265-65D00 – installs with no modifications.
- Interchangeable with LUK 500101460 and Sachs 3151996602 for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to Suzuki factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
