Ordinary Release Bearing VKC2045
The DUHUI VKC2045 clutch release bearing is a direct-fit replacement engineered for Mercedes-Benz C-Class and E-Class applications. This clutch release bearing meets multiple OE specifications including 6612503015 and 0002505215, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2045 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 6612503015, 0002505215, 0002505115, 0002502115, 0002500915, 0002500715
Reference Numbers (Interchange):
SKF: VKC2045
Timken: RB9814
Vehicle Fitment
MERCEDES-BENZ: C-Class (W202) C 180 (202.018) (1994-2000), C-Class T-Model (S202) C 180 T (202.078) (1996-2000), E-Class (W210) E 200 (210.035) (1995-2000)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Mercedes-Benz C-Class and E-Class clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple Mercedes-Benz specifications – installs with no modifications.
- Interchangeable with LUK 500000110 and Sachs 3151133331, 3151254041, 3151038031 for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to Mercedes-Benz factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
