Ordinary Release Bearing VKC2202
The DUHUI VKC2202 clutch release bearing is a direct-fit replacement engineered for Mercedes-Benz 123 Series classic applications. This clutch release bearing meets multiple OE specifications including A0012502415 and 0012502415, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2202 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: A0012502415, 0012502415, 0012502315, 0002508715, 0002506915, 0002506215, 0002506115
Reference Numbers (Interchange):
SKF: VKC2202
Timken: F-355594
Vehicle Fitment
MERCEDES-BENZ: 123 Coupe (C123) 230 CE (123.243) (1980-1985), 123 Saloon (W123) 200 (123.220) (1980-1985), 123 T-Model (S123) 200 T (1980-1985)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches Mercedes-Benz 123 Series clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple Mercedes-Benz specifications – installs with no modifications.
- Interchangeable with LUK 500021210 and Sachs 3151122331, 3151122031, 3151100031 for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to Mercedes-Benz factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
