Ordinary Release Bearing VKC2601
The DUHUI VKC2601 clutch release bearing is a direct-fit replacement engineered for VW, Audi, and Ford applications. This clutch release bearing meets multiple OE specifications including 88BB7548AA and 01E141165B, providing dependable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2601 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Type | Push-type |
| Material | Chrome steel bearing with reinforced polymer sleeve |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 88BB7548AA, 6164967, ECB135, 01E141165B, 01E141165A, 01E141165, 012141165F, 012141165E
Reference Numbers (Interchange):
SKF: VKC2601
Timken: RB9854
Vehicle Fitment
AUDI: 100 C3 Avant (445, 446) 1.8 (1983-1989), 100 C3 Avant (445, 446) 2.2 Turbo quattro (1986-1990), 100 C4 Saloon (4A2) 2.0 E (1990-1994)
VW: Various models
FORD: Various models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Push-type release bearing configuration matches VW, Audi, and Ford clutch system specifications.
- Chrome steel raceway and ball elements provide consistent release force under repeated engagement cycles.
- Reinforced polymer guide sleeve reduces friction on the transmission input shaft.
- Direct OE replacement for multiple manufacturer specifications – installs with no modifications.
- Interchangeable with LUK 500041010, 500032211, and Sachs 3151822032, 3151822001, 3151271937, 3151843001 for aftermarket flexibility.
- Factory pre-lubricated with high-temperature grease for service-ready installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to the vehicle manufacturer’s factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces clutch release bearings to OE specifications. Contact us
