Ordinary Release Bearing VKC3556
The DUHUI VKC3556 ordinary release bearing is a direct replacement engineered for TOYOTA CARINA applications. This release bearing matches OE specifications including 31230-12110 and cross-references with SKF VKC3556, LUK 500043710, and SACHS 3151851001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3556 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 31230-12110, 31230-16060, 31230-12140, 31230-12040, 31230-12100, 31230-12130, 31230-16071
Reference Numbers (Interchange):
SKF: VKC3556
Timken: RCT337SA3-1, RCT335SA1, RCT335SA4, 50TKB3301BR, 50TKA3305RU3
LUK: 500043710, 500043760
SACHS: 3151851001
Vehicle Fitment
TOYOTA: CARINA IV (_T15_) 1.6 (AT151_, AT151R) 1986-1987, CARINA IV Saloon (_T15_) 1.6 (AT151_, AT151R) 1983-1987, CARINA V (_T17_) 1.6 (AT171_) 1987-1992
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match TOYOTA CARINA clutch system specifications.
- OE-match design for CARINA IV and V models with 1.6L engines.
- Push-type release bearing configuration compatible with original clutch systems.
- Extensive cross-reference coverage: SKF VKC3556, LUK 500043710, SACHS 3151851001.
- Multiple OE number interchange: 31230-12110, 31230-16060, and additional factory part numbers.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to TOYOTA factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
