Wheel Bearing DAC44825037-2RZ
The DUHUI Bearing DAC44825037-2RZ double-row wheel bearing is an OE-replacement solution for Citroën Evasion and other compatible PSA Group vehicles from the 1990s. This double-row angular contact ball bearing features rubber seals on both sides (2RS) for enhanced contamination protection and grease retention. Manufactured to match original equipment specifications including DAC44825037-2RZ, this wheel bearing delivers reliable performance for compatible Citroën and Peugeot vehicles.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0135 | |
| Part Number | DAC44825037-2RZ | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Fitting Position | Front Axle | |
| Inner Diameter | 44.00 mm | 1.732 in |
| Outer Diameter | 82.50 mm | 3.248 in |
| Width | 37.00 mm | 1.457 in |
| Seal Type | 2RZ (Double Rubber Seal) | |
| ABS Sensor | Not Included | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0135
OE Numbers:
DAC44825037-2RZ, 3350.27, 3350.91, 71714473, 9567217680, 13350.27
Reference Numbers (Interchange):
SNR: GB40246S07
FAG: 713630555
SKF: VKBA7130
TIMKEN: 510087
Vehicle Fitment
CITROËN EVASION MPV (22, U6): 1.8 1996-1996
Additional compatible models (verify before ordering):
CITROËN: Evasion (1994-2000), Jumpy (1996-2002)
PEUGEOT: 806 (1996-2002), Expert (1996-2002)
FIAT: Ulysse (1996-2002), Scudo (1996-2002)
Engine Compatibility: LFZ (XU7JP) 1.8L (76 kW / 103 hp)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life.
- 2RZ rubber seals on both sides provide effective contamination protection and grease retention.
- Manufactured from high-carbon chromium bearing steel (GCr15) for durability under load.
- Pre-lubricated and sealed design reduces maintenance requirements.
- Precision-ground raceways ensure smooth rotation and precise wheel guidance.
Installation Notes
- Confirm inner diameter is 44.00 mm (1.732 in), outer diameter is 82.50 mm (3.248 in), and width is 37.00 mm (1.457 in) before installation.
- Do not attempt to disassemble the wheel bearing unit or remove the seals – this will cause permanent damage.
- Press the bearing into the hub using appropriate tools – never strike with a hammer.
- Torque the hub nut to manufacturer specifications (refer to the vehicle service manual).
- Verify fitment for your specific Citroën, Peugeot, or Fiat model before ordering.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
