Wheel Bearing DAC43760043-2Z
The DUHUI Bearing DAC43760043-2Z double-row wheel bearing is an OE-replacement solution for the Nissan Almera Tino (V10) from 2000 to 2006, as well as other compatible Nissan applications. This double-row angular contact ball bearing features metal shields on both sides (2Z) for effective contamination protection and grease retention. Manufactured to match original equipment specifications including DAC43760043-2Z and BCA 510060, this wheel bearing delivers dependable performance for compatible Nissan vehicles.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0124 | |
| Part Number | DAC43760043-2Z | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Inner Diameter | 43.00 mm | 1.693 in |
| Outer Diameter | 76.00 mm | 2.992 in |
| Width | 43.00 mm | 1.693 in |
| Seal Type | 2Z (Double Metal Shield) | |
| Weight | 0.77 kg | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0124
OE Numbers:
DAC43760043-2Z
Reference Numbers (Interchange):
BCA: 510060
SKF: VKBA3278
SNR: R168.60
FAG: 713642570
TIMKEN: 510060
Vehicle Fitment
NISSAN ALMERA TINO (V10): 1.8 2000-2006
Additional compatible models (verify before ordering):
NISSAN: Almera Tino 2.0 (2000-2006), Primera (P12) 2002-2008
Engine Compatibility: QG18DE 1.8L (84 kW / 113 hp), QG20DE 2.0L
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life.
- 2Z metal shields on both sides provide effective contamination protection while minimizing friction.
- Manufactured from high-carbon chromium bearing steel (GCr15) for durability under load.
- Precision-ground raceways ensure smooth rotation and precise wheel guidance.
- Pre-lubricated design reduces maintenance requirements.
- Interchangeable with BCA 510060, SKF VKBA3278, and SNR R168.60.
Installation Notes
- Confirm inner diameter is 43.00 mm (1.693 in), outer diameter is 76.00 mm (2.992 in), and width is 43.00 mm (1.693 in) before installation.
- Do not attempt to disassemble the wheel bearing unit or remove the shields – this will cause permanent damage.
- Press the bearing into the hub using appropriate tools – never strike with a hammer.
- Torque the hub nut to manufacturer specifications (refer to the Nissan service manual).
- Verify fitment for your specific Nissan model before ordering.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
