Wheel Bearing DAC408405397-RZ-ABS(88G) With circlip
The DUHUI Bearing DAC408405397-RZ-ABS(88G) double-row wheel bearing is an OE-replacement solution for the Mazda Tribute (EP) from 2000 to 2008, and is also compatible with Ford Escape and Mercury Mariner models of the same platform. This double-row angular contact ball bearing features an integrated magnetic encoder ring, a rubber seal (RZ), and a circlip for secure axial positioning. Manufactured to match original equipment specifications including DAC408405397-RZ-ABS(88G), this wheel bearing delivers dependable performance for compatible vehicles.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0088 | |
| Part Number | DAC408405397-RZ-ABS(88G) | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Fitting Position | Front Axle | |
| Inner Diameter | 40.00 mm | 1.575 in |
| Outer Diameter | 84.05 mm | 3.309 in |
| Width | 39.70 mm | 1.563 in |
| ABS Sensor | Integrated (Magnetic Encoder Ring) | |
| Seal Type | RZ (Rubber Seal) | |
| Additional Features | With Circlip | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0088
OE Numbers:
DAC408405397-RZ-ABS(88G), EC01-26-151A, EC01-26-151A S1
Reference Numbers (Interchange):
SKF: VKBA4592
FAG: 713665100
Vehicle Fitment
MAZDA TRIBUTE (EP): 2.0 (EPEW) 2000-2008
Additional compatible models (verify before ordering):
MAZDA TRIBUTE (EP): 2.3, 3.0 V6 (2000-2008)
FORD ESCAPE: 2001-2012
MERCURY MARINER: 2005-2011
Engine Compatibility: YF 2.0L (91 kW / 124 hp), 2.3L, 3.0L V6
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life.
- Integrated magnetic encoder ring ensures compatibility with modern ABS systems – keep away from magnetic sources during handling.
- RZ rubber seal provides effective contamination protection and grease retention.
- Includes circlip for secure axial positioning.
- Manufactured from high-carbon chromium bearing steel (GCr15) for durability under load.
- Precision-ground raceways ensure smooth rotation and precise wheel guidance.
- Pre-lubricated and sealed design reduces maintenance requirements.
Installation Notes
- Confirm inner diameter is 40.00 mm (1.575 in), outer diameter is 84.05 mm (3.309 in), and width is 39.70 mm (1.563 in) before installation.
- This bearing features an integrated ABS encoder ring – keep away from strong magnetic fields until installation.
- Do not attempt to disassemble the wheel bearing unit or remove the seal – this will cause permanent damage.
- Ensure the circlip is properly seated in its groove after installation.
- Press the bearing into the hub using appropriate tools – never strike with a hammer.
- Torque the hub nut to manufacturer specifications (refer to the Mazda service manual).
- Verify fitment for your specific Mazda Tribute, Ford Escape, or Mercury Mariner model before ordering.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
