Ordinary Release Bearing VKC3598
The DUHUI VKC3598 ordinary release bearing is a direct replacement engineered for NISSAN applications. This release bearing matches OE specifications including 30502-18E18 and cross-references with SKF VKC3598, LUK 500043660, and SACHS 3151829001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3598 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 30502-18E18, 30502-28E18, 30502-56A60, 30502-56A00, 30502-03E18, 30502-1W718
Reference Numbers (Interchange):
SKF: VKC3598
Timken: RCTS33SA4, 62TKA3311, FCR62-27/2E, FCR62-28-5/2E, FCR62-33-4/2E, FCR62-11/2E
LUK: 500043660
SACHS: 3151829001
Vehicle Fitment
NISSAN: ALTIMA (L30) 2.4 1997-2001, BLUEBIRD (T72, T12, U12) 2.0 D (SLT72, T12) 1986-1990, NAVARA NP300 (D40) 2.5 dCi 4WD 2006-
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match NISSAN clutch system specifications.
- OE-match design for ALTIMA, BLUEBIRD, and NAVARA NP300 applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Extensive cross-reference coverage: SKF VKC3598, LUK 500043660, SACHS 3151829001.
- Multiple interchange numbers including RCTS33SA4, 62TKA3311, and FCR62 series.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to NISSAN factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
