Ordinary Release Bearing VKC2025
The DUHUI VKC2025 ordinary release bearing is a direct replacement engineered for AUDI, SAAB, VW, and BENZ applications. This release bearing matches OE specifications including 111141165 and cross-references with SKF VKC2025, LUK 500000410, and SACHS 3151270602.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2025 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 111141165, 111141165A, 111141165C
Reference Numbers (Interchange):
SKF: VKC2025
Timken: RB9031, CR1240
LUK: 500000410
SACHS: 3151270602
Vehicle Fitment
AUDI: Various models
SAAB: Various models
BENZ: Various models
VW: 1500,1600 (31) 1.5 1961-1973, KAEFER 1200 1.2 (11) 1960-1985, TRANSPORTER T1 Bus (22, 24, 25, 28) 1.1 (44593) 1950-1962
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match multiple European manufacturer clutch system specifications.
- OE-match design with cross-application compatibility for AUDI, SAAB, VW, and BENZ.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC2025, LUK 500000410, and SACHS 3151270602.
- Interchange numbers: RB9031 and CR1240.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to manufacturer factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
