Ordinary Release Bearing VKC2051
The DUHUI VKC2051 ordinary release bearing is a direct replacement engineered for CITROEN, PEUGEOT, and TALBOT applications. This release bearing matches OE specifications including 7940708649 and cross-references with SKF VKC2051, LUK 500001710, and SACHS 3151839001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2051 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 7940708649, 2041.30, 2041.14
Reference Numbers (Interchange):
SKF: VKC2051
Timken: RB9568, F-363989, F-275853, CR1207
LUK: 500001710
SACHS: 3151839001, 1850282124
Vehicle Fitment
CITROEN: Various models
PEUGEOT: 504 (A_, M_) 1.8 Injection (A02) 1968-1971, 504 Break (D_, F_) 1.8 (F01, E01) 1971-1986, 505 (551A) 1.8 1982-1985
TALBOT: Various models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match PEUGEOT and CITROEN clutch system specifications.
- OE-match design for PEUGEOT 504, 505, and compatible models.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC2051, LUK 500001710, and SACHS 3151839001.
- Multiple interchange numbers including RB9568, F-363989, and CR1207.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to manufacturer factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
