Ordinary Release Bearing 22810-PCY-003
The DUHUI 22810-PCY-003 ordinary release bearing is a direct replacement engineered for HONDA S2000 applications. This release bearing matches OE specification 22810-PCY-003 and cross-references with BRG933 and CB68SRG.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | 22810-PCY-003 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 22810-PCY-003
Reference Numbers (Interchange):
Timken: BRG933, CB68SRG
Vehicle Fitment
HONDA: S2000 (AP) 2.0 (AP1) 1999-, S2000 (AP) 2.0 Vtec 1999-2003, S2000 (AP) 2.0 Vtec (AP1) 2003-
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for HONDA S2000 AP1 applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Interchange numbers: BRG933 and CB68SRG.
- Factory pre-lubricated with high-temperature grease for immediate installation.
- 2-year / 50,000 km warranty for aftermarket assurance.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to HONDA factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
