Ordinary Release Bearing VKC3579
The DUHUI VKC3579 ordinary release bearing is a direct replacement engineered for MITSUBISHI, HYUNDAI, and KIA applications. This release bearing matches OE specifications including MD719469 and cross-references with SKF VKC3579, LUK 500041660, and SACHS 3151832001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3579 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: MD719469, MR195689, 41421-43000, 41421-43010
Reference Numbers (Interchange):
SKF: VKC3579
Timken: RCTS325SA, RCT325SA, FCR55-10/2E, FCR55-17/2E, FCR55-17-11/2E, FCR55-17-9/2E, 614053
LUK: 500041660
SACHS: 3151832001
Vehicle Fitment
MITSUBISHI: L 300 / DELICA II Platform/Chassis (L03_P) 2.5 D (L039P) 1986-1994, L200 (K3_T, K2_T, K1_T, K0_T) 2.5 D (K14T) 1986-1996, L200 / TRITON (KA_T, KB_T) 2.5 D 2011-2015
HYUNDAI: GALLOPER I 2.5 TD 1991-1998, H-1 / STAREX Bus (A1) 2.4 1997-2004, H-1 Van (A1) 2.4 2000-2004
KIA: Various models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for L200, DELICA, GALLOPER, and H-1 applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3579, LUK 500041660, and SACHS 3151832001.
- Multiple interchange numbers including RCTS325SA and FCR55 series.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to MITSUBISHI, HYUNDAI, or KIA factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
