Ordinary Release Bearing VKC3666
The DUHUI VKC3666 ordinary release bearing is a direct replacement engineered for HYUNDAI ACCENT and COUPE applications. This release bearing matches OE specifications including 41421-28000 and cross-references with SKF VKC3666, LUK 500037560, and SACHS 3151994601.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3666 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 41421-28000, 41421-22800, 41421-22810, 41421-22731, 41421-22650
Reference Numbers (Interchange):
SKF: VKC3666
Timken: RB9002, BRG855, PRB04
LUK: 500037560
SACHS: 3151994601
Vehicle Fitment
HYUNDAI: ACCENT I (X-3) 1.3 1994-2000, ACCENT II Saloon (LC) 1.3 2000-2005, COUPE I (RD) 1.6 16V 1998-2002
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for HYUNDAI ACCENT and COUPE applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3666, LUK 500037560, and SACHS 3151994601.
- Multiple OE number interchange: 41421-28000, 41421-22800, 41421-22810, 41421-22731, 41421-22650.
- Interchange numbers: RB9002, BRG855, and PRB04.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to HYUNDAI factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
