Ordinary Release Bearing 41421-28001
The DUHUI 41421-28001 ordinary release bearing is a direct replacement engineered for HYUNDAI ACCENT applications. This release bearing matches OE specifications including 41421-28001 and cross-references with SKF VKC3666, LUK 500037560, and SACHS 3151994601.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | 41421-28001 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 41421-28001, 41421-28002, 41421-28010
Reference Numbers (Interchange):
SKF: VKC3666
Timken: RB9699, PRB95
LUK: 500037560
SACHS: 3151994601
Vehicle Fitment
HYUNDAI: ACCENT I (X-3) 1.3 1994-2000, ACCENT II (LC) 1.3 2000-2005, ACCENT II Saloon (LC) 1.3 2000-2005
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for HYUNDAI ACCENT I and II applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3666, LUK 500037560, and SACHS 3151994601.
- Multiple OE number interchange: 41421-28001, 41421-28002, 41421-28010.
- Interchange numbers: RB9699 and PRB95.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to HYUNDAI factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
