Ordinary Release Bearing VKC3759
The DUHUI VKC3759 ordinary release bearing is a direct replacement engineered for HYUNDAI and KIA applications. This release bearing matches OE specifications including 41421-23010 and cross-references with SKF VKC3759, LUK 500122010, and SACHS 3151600547.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3759 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 41421-23010, 41421-23020, 41421-32000
Reference Numbers (Interchange):
SKF: VKC3759
Timken: PRB96, BRG934
LUK: 500122010
SACHS: 3151600547
Vehicle Fitment
HYUNDAI: ACCENT III (MC) 1.4 GL 2005-2010, ACCENT III Saloon (MC) 1.4 GL 2005-2010, ELANTRA IV Saloon (HD) 1.6 CRDi 2005-2011
KIA: CARENS III MPV (UN) 1.6 CRDi 110 2010-2013, CEE’D (JD) 1.0 T-GDI 2015-2018, CEE’D Combi Van (JD) 1.0 T-GDI 2015-2018
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for HYUNDAI ACCENT and ELANTRA, and KIA CARENS and CEE’D applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3759, LUK 500122010, and SACHS 3151600547.
- Multiple OE number interchange: 41421-23010, 41421-23020, 41421-32000.
- Interchange numbers: PRB96 and BRG934.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to HYUNDAI or KIA factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
